INTEX CHEMICAL INC -- PAINT REMOVER  -- 8010-00-348-7716
<pre>=====================  Product Identification  =====================

Product ID:PAINT REMOVER
MSDS Date:05/10/1991
FSC:8010
NIIN:00-348-7716
=== Responsible Party ===
Company Name:INTEX CHEMICAL INC
Box:6648
City:GREENVILLE
State:SC
ZIP:29606
Country:US
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:HAZEL MOORE
CAGE:78304
=== Contractor Identification ===
Company Name:INTEX CHEMICAL INC
Address:122 EDINBURG CT
Box:6648
City:GREENVILLE
State:SC
ZIP:29606-6648
Country:US
Phone:803-879-7100 OR 803-297-4246
CAGE:78304

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIA  (SARA III)
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: 5-8%
Other REC Limits:NONE SPECIFIED
OSHA PEL:50 PPM
ACGIH TLV:25 PPM/35 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:METHYLENE CHLORIDE	(SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 47-52%
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 15-20%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Ingred Name:SODIUM CHROMATE  (SARA III)
CAS:7775-11-3
RTECS #:GB2955000
Fraction by Wt: 0.1-1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.1 PPM CRO3;CEILING
ACGIH TLV:0.05 MG CR/M3; 9192
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Ingred Name:VOC (LB/GAL): 900-1300
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:MAY COMBINE WITH BLOOD TO FORM
    CARBOXYHEMOGLOBIN AS CARBON MONOXIDE DOES.
Explanation of Carcinogenicity:METHYLENE CHLORIDE IS LISTED AS A
    CARCINOGEN.
Effects of Overexposure:BURNS TO SKIN AND EYES. INHALATION MAY CAUSE
    NAUSEA, DIZZINESS, INCREASED PULSE BREATHING AND UNCONSCIOUSNESS.

=======================  First Aid Measures  =======================

First Aid:EYE/SKIN: FLUSH EYES W/LARGE AMOUNTS WATER, HOLDING LIDS
    APART. WASH SKIN THOROUGHLY W/SOAP & WATER. DISCARD CONTAMINATED
    CLOTHING. GET MEDICAL ATTENTION. INHALE: REMOVE TO FRESH AIR. GIVE
    OXYGEN IF N ECESSARY. GET MEDICAL ATTENTION. INGESTION: DO NOT
    INDUCE VOMITING. GIVE LARGE AMOUNTS OF WATER OR MILK IF AVAILABLE.
    IF VOMITING SHOULD OCCUR, KEEP AIRWAYS CLEAR. GET MEDICAL ATTENTION
    IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:N/D
Extinguishing Media:WATER, FOG, CO2, FOAM.
Fire Fighting Procedures:EXTINGUISHING METHOD FOR FIRE SOURCE.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT SPILL WITH ABSORBENT MATERIAL, DRUM
    FOR DISPOSAL. FLUSH RESIDUE WITH WATER. USE PERSONAL PROTECTIVE
    EQUIPMENT DESCRIBED ABOVE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM INCOMPATIBLE
    MATERIALS. STORE IN COOL, DRY PLACE. KEEP CONTAINER CLOSED WHEN NOT
    IN USE.
Other Precautions:MOVE WITH BUNGS IN PLACE. WEAR EYE PROTECTION AND
    GLOVES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED SELF-CONTAINED.
Ventilation:LOCAL <TLV.
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:SAFETY GLASSES/GOGGLES.
Other Protective Equipment:RUBBER BOOTS AND APRON.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:T4
Boiling Pt:B.P. Text:105F,41C
Vapor Pres:375 MM HG
Vapor Density:>1
Spec Gravity:1.05-1.06
pH:12- *
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS, YELLOW LIQUID; AMMONIA ODOR.
Percent Volatiles by Volume:75-85
Corrosion Rate:*12.4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS
Hazardous Decomposition Products:EVOLUTION OF NITROGEN, CARBONS.
Conditions to Avoid Polymerization:ACIDS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH PROPER
    AUTHORITIES. HAZARDOUS WASTE CODE #: U080.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.