ACE HARDWARE CORP/PAINT DIV -- 230A110, WATERPROOFING SEALER CLEAR  -- 8010-00N029000
<pre>=====================  Product Identification  =====================

Product ID:230A110, WATERPROOFING SEALER CLEAR
MSDS Date:11/20/1986
FSC:8010
NIIN:00N029000
=== Responsible Party ===
Company Name:ACE HARDWARE CORP/PAINT DIV
Address:21901 SOUTH CENTRAL AVENUE
City:MATTESON
State:IL
ZIP:60443
Country:US
Info Phone Num:312-720-0600
Emergency Phone Num:312-720-0600
CAGE:ACEHA
=== Contractor Identification ===
Company Name:ACE HARDWARE CORPORATION
Address:21901 SOUTH CENTRAL AVENUE
City:MATTESON
State:IL
ZIP:60443
Country:US
Phone:708-720-0600
CAGE:ACEHA

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; (MINERAL SPIRITS). VP:
    2.0
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 68.5%
OSHA PEL:500 PPM (MFR)
ACGIH TLV:100 PPM (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL IS ANESTHETIC. IRRITATION
    OF RESPIRATORY TRACT OR NERVOUS SYSTEM DEPRESSION. HEADACHE,
    DIZZINESS, NAUSEA, CONFUSION, UNCONSCIOUSNESS OR COMA. SKIN/EYE
    CONT: PRIMARY IRRITATION. DURING EME RGENCY CONDITIONS OVEREXPOSURE
    TO DECOMPOSITION PRODUCTS MAY CAUSE HLTH HAZARD. SYMPTOMS MAY NOT
    BE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: APPARENT. CHRONIC: REPORTS HAVE
    ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO
    SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM AND
    QUIET, NOTIFY PHYS. EYES: FLUSH IMMED WITH RUNNING WATER FOR AT
    LEAST 15 MIN. SKIN: WASH WITH SOAP AND WATER AND APPLY SKIN CREAM.
    NOTIFY  PHYS IN ALL CASES. INGEST: CALL MD IMMED .

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:105F,41C
Lower Limits:0.9%
Extinguishing Media:FOAM, "ALCOHOL" FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H2O
    SPRAY MAY BE INEFTIVE. H2O MAY BE USED TO COOL CLSD CONTR TO PVNT
    PRESS BUILD-UP & POSS AUTO (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
    FROM HEAT, ELEC EQUIP, SPARKS, & OPEN FLAME. HEAT MAY CAUSE PRESS
    BUILD-UP IN CLOSED CONTR, H2O MAY BE USED TO COOL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
    REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DOL STORAGE CATEGORY 2.
Other Precautions:CONTENTS ARE COMBUSTIBLE. KEEP AWAY FROM HEAT/OPEN
    FLAME. USE ONLY W/ADEQ VENT. AVOID BRTHG VAP/SPRAY MIST. AVOID CONT
    W/SKIN/ EYES. KEEP CONTR CLSD WHEN NOT IN USE. DO NOT TRANSFER
    CONTENTS TO OTHER  CONTR FOR STORAGE. DO NOT (SUPP DATA)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF ENGINEERING AND ADMINISTRATIVE CONTROLS OR
    AIR CONTAMINANTS ARE NOT POSSIBLE, USE NIOSH/MSHA APPROVED
    RESPIRATORY DEVICES FOR PROTECTION AGAINST SPRAY MIST AND VAPORS.
Ventilation:LOCAL EXHAUST PREFERABLE. MECH(GEN) EXHAUST PREFERABLE.
    SPECIAL VENTILATION REQUIRED TO KEEP BELOW TLV AND LEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING, DISCARD
    CONTAMINATED SHOES. WASH HANDS AFTER USING.
Supplemental Safety and Health
FIRE FIGHT PROC: IGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
    OTHER PREC: TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. CONSULT
    NFPA CODE. USE APPROVED BONDING AND GROUNDING PROCEDURE.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:>308F,>153C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.9 
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:62.11

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAME.
Hazardous Decomposition Products:BY FIRE: CO2 AND CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DO NOT
    INCINERATE CLOSED CONTAINERS. DISPOSE OF IN ACCORDANCE WITH
    FEDERAL, STATE, AND LOCAL REGULATIONS REGARDING POLLUTION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.