EFFECTIVE DATE

2004-08-18

HMIS

HEALTH

1

FLAMMABILITY

4

PHYSICAL HAZARD

PERSONAL PROTECTION

NFPA

1

4

0

ABC Unified School district
Local data

SKU #

*This local data is shared by all revisions

Blair Spray Adhesive

2004-08-18

Hazard Statements

HEALTH EFFECTS Inhalation High concentrations of vapors may irritate nose and throat and cause symptoms of intoxication such as dizziness, nausea, headache, or indigestion. Eye Contact Direct spray or vapors may cause mild irritation. Symptoms include stinging, tearing, and redness. Skin Contact May cause mild irritation. Prolonged or repeated contact may dry the skin. Symptoms include redness, burning, drying and cracking of skin, and skin burns. Ingestion Swallowing large amounts may be harmful. This material can get into the lungs during swallowing or vomiting. This can result in

Precautionary Statements

5. FIRE FIGHTING MEASURES Extinguisher Media Foam, Dry Chemical (B-C), CO2 Flame Projection Data > 36” (91.44 cm) Flammability EXTREMELY FLAMMABLE UNUSUAL HAZARDS: Do not expose to temperatures exceeding 120°F as containers may vent, rupture or burst. SPECIAL FIRE FIGHTING PROCEDURES: Keep containers cool using water spray. Use proper equipment to protect personnel from bursting containers. Avoid use of any sources of ignitions. 6. ACCIDENTAL RELEASE MEASURES PROCEDURES FOR CLEANING UP LEAKS AND SPILLS: Eliminate all ignition sources. Absorb spill with inert material then place in a chemical waste container. Dispose of spill material in accordance with regulations. 7. HANDLING, STORAGE, AND DISPOSAL HANDLING: Use with adequate ventilation. Make sure containers are properly grounded before use or transfer of material. Sparks may form that may ignite the vapors. Deliberately concentrating and inhaling the contents of this container may be harmful and fatal. Keep out of reach of children. Wash hands thoroughly after each use. STORAGE: Do not use or store near heat, sparks, or flame. Do not store at temperatures above 120°F. Keep out of reach of children. DISPOSAL: Dispose of waste material in accordance with state, local, and federal regulations. 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION See Section 2 for applicable exposure limits. ENGINEERING CONTROLS: Maintain adequate ventilation to maintain below exposure limits (TLV(s). PERSONAL PROTECTIVE EQUIPMENT: Use respirator only as a last resort to control exposure when engineering controls are not feasible. Wear chemical-resistant GLOVES if repeated skin contact occurs or causes irritation. Wear SAFETY GLASSES or GOGGLES to prevent eye contact.

Manufacturer information

Name

CREATIVE CHEMICAL SOLUTIONS LT

Phone

216-765-0620

Address

26055 Emery Rd
Suite C
Cleveland, OH 44128
USA

HMIS

HEALTH

1

FLAMMABILITY

4

PHYSICAL HAZARD

PERSONAL PROTECTION

NFPA

1

4

0

ABC Unified School district
Local data

SKU #

*This local data is shared by all revisions